Samedisk

There's 10 pin cable with 10 colors

Brown - in, Chip Select
Red - NC, (VCC33)
Orange - out, Romter Data Output
Yellow - in, HOLD
Green - in, Write Protect
Blue - in, Clock input
Purple - GND
Gray - in, Romter Data input
White - NC
Black - NC

We strongly suggest you confirm target GND is connect to USB cable shell (system ground) before power-on.
_________________
Samedisk <- Engineers' Better Tomorrow !
http://www.samedisk.com
---------------------------------------------
Welcome to discuss Romter, SPI, Emulator, USB, Flash

We already add VCC detect, so Red line is also input now.
You may measure VCC status by SAMEFILE DEBUG VIEW