Samedisk

發表於 : **週三 9月 10, 2008 3:29 pm**

As title, we need ex for 86 cmd debuging.
is this cmd defined by STMicro? since cannot see in M25P16 datasheets.

發表於 : **週三 9月 10, 2008 3:31 pm**

this unit borrow from Andy, ZC25128 red box.

發表於 : **週四 9月 11, 2008 8:14 pm**

Not very sure which one you need.

For Intel ICH series SPI 86 87 command please reference to this post:
http://www.samedisk.com/cht/forum/viewtopic.php?t=139

If you're EC(KBC) user, please let us know your IC vendor.

SPI 86 87 command is defined by SAMEDISK after survey many Board & Chip design. This is the most safe way to debug an unknown bug, even just CPU can run few steps after power-on.
_________________
Samedisk <- Engineers' Better Tomorrow !
USB SPI, NOR, NAND, I/O, Emulator, Romter, ICE
產品網址
---------------------------------------------
我的部落格

發表於 : **週五 9月 12, 2008 7:25 am**

A display application program for 16 bit records dump.
we very need it please.

my ICH9M SPI sending code is good because its from other.

發表於 : **週五 9月 12, 2008 8:26 am**

Check your Personal Message in this forum.
_________________
Samedisk <- Engineers' Better Tomorrow !
USB SPI, NOR, NAND, I/O, Emulator, Romter, ICE
產品網址
---------------------------------------------
我的部落格

發表於 : **週日 9月 14, 2008 9:24 am**

turbo c !!!!!!!!!!
好久沒見到了沒想到你們是用這個啊

Samedisk

SPI 86 command example?

SPI 86 command example?

Re: SPI 86 command example?

Re: SPI 86 command example?

Re: SPI 86 command example?

Re: SPI 86 command example?

Re: SPI 86 command example?